Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover
  • Load image into Gallery viewer, Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover

Fender Rumble 100 V3 Bass Combo 100-Watt 1x12 Black/Silver + Cover

Regular price
$259.00
Sale price
$259.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

A great fit for gigging players, rehearsals, and home recording, this 100-watt combo gives you enough control to dial in everything from a clean, articulate bass sound to warmer vintage-style tones and driven rock sounds. The Bright, Contour, and Vintage voicing switches make broad tonal changes quickly, while the four-band EQ gives you more precise control once you're in the right neighborhood.

The built-in overdrive adds another useful sound without requiring a separate pedal, and the XLR line output makes it easy to send your signal to a PA or recording setup. At roughly 22 pounds, it's also considerably easier to move than many traditional bass combos with comparable output. The included amp cover helps keep it protected between rehearsals and gigs.

KEY FEATURES

  • 100-watt Class-D bass combo
  • 1x12" Eminence Special Design speaker
  • 8-ohm speaker load
  • Gain and master volume controls
  • Four-band EQ: Bass, Low Mid, High Mid, Treble
  • Bright, Contour, and Vintage voicing switches
  • Switchable onboard overdrive with Drive and Level controls
  • Effects send and return
  • Aux input
  • Headphone output
  • XLR line output with ground lift
  • Footswitch connection for overdrive
  • Lightweight plywood cabinet
  • Silver grille cloth
  • Approximately 22 lb.
  • Made in Indonesia
  • Type PR 2495
  • Serial ICTB21015584
  • Protective amp cover included

TONE TIPS & USE CASES

  • Clean/general-purpose: Start with the voicing switches off and EQ near center, then adjust for the room.
  • Old-school bass: Vintage mode is the quickest route toward a warmer, rounder character.
  • Slap/funk: Contour provides a more scooped response; Bright can add extra attack when needed.
  • Rock: Use the onboard Drive and Level controls to introduce grit while retaining control over overall volume.
  • Live use: The XLR output provides a straightforward feed to a PA while the combo serves as your stage monitor.
  • Practice: Aux and headphone connections make it useful at lower-volume rehearsals and at home.